Provides superlative analog sound reproduction Reproduces sound with the full expressiveness of the original recording Newly designed magnetic circuit improves the cartridge’s efficiency Output voltage is improved by more than 15% without increasing the number of coil turns which can increase mass and impedance. High-quality terminal pins with thick gold plating are approximately 30 times than that of conventional products to reduce contact resistance Constructed of titanium, and aluminum with an elastomer undercover to reduce undesirable resonance Special line contact stylus and solid boron cantilever with a 0.28 mm diameter provide premium high-frequency response with minimal inner-groove distortion for consistent reproduction Utilises the advanced cutting and polishing technologies cultivated in the eyeglass industry of Sabae City, Fukui Prefecture, with history stretching back more than 100 years Threaded cartridge mounting holes allow easy installation to a headshell or integrated tonearm Audio Technica AT-ART20 Moving Coil Cartridge Manual (Click to OPEN/DOWNLOAD) SPECIFICATIONS Frequency Response 20 to 50,000 Hz Channel Separation 30 dB (1 kHz) Vertical Tracking Angle 20° Vertical Tracking Force 1.6 to 2.0 g (1.8 g standard) Stylus Construction Nude Recommended Load Impedance ≥ 100 ohms (when head amplifier connected) Coil Impedance 12 ohms (1 kHz) DC Resistance 12 ohms Coil Inductance 25 μH (1 kHz) Output Voltage 0.55 mV (1 kHz, 5 cm/sec.) Stylus Shape Special Line Contact Cantilever 0.28 mm (0.011”) diameter solid boron Static Compliance 23 × 10-6 cm/dyne Dynamic Compliance 13 × 10-6 cm/dyne (100 Hz) Cartridge Weight 9.0 g (0.32 oz) Dimensions 17.3 mm (0.68”)×16.8 mm (0.66”)×26.6 mm (1.05”) (H×W×D) Accessories Included Non-magnetic screwdriver, Brush, Washer × 2, Cartridge installation screws (M2.6) (5.0 mm (0.20”) × 2 , 8.0 mm (0.31”) × 2, 10.0 mm (0.39”) × 2 , 12.0 mm (0.47”) × 2), Protector Threaded Hole M2.6 × 2 Stylus Curvature Radius 1.5 × 0.28 mil Type MC
