Description Woodside Electrofusion Welding Wipes are used to clean joints before welding thermoplastic materials including PE, PP, PB and PVDF. With their high purity content of over 90% IPA, they will ensure your pipe surface is clean and ready to weld. First usage: – Gently shake the tub to distribute the alcohol solution evenly. – Remove the lid of the container, and pierce a hole in the foil seal. – From the centre of the roll, thread a wipe through the lid, then replace the lid. – Remove wipes as required and re-seal by pushing down the flip cap to prevent the wipes drying out. Cleaning the surfaces before welding: – After preparing any materials to be welded, dry both surfaces and wipe them with a Woodside Fusion Alcohol Wipe, which is soaked in an ethanol based solution. – Replace the wipe after each usage to prevent contamination. – Remember, always ensure all surfaces are dry and lint free before beginning your weld. Properties: – resistant to tearing – can be used with drinking water installations – very good cleaning and disinfecting properties – leaves no deposits or fibres – perfect for cleaning PE pipes – ultra high liquid content keeps wipes moist 100 wipes per tub
